Neutrik NAC3MPA
PowerCon

Locking 3 pole Mains Connector. Fast and easy locking system. High current capacity (20 A rated). Extremely robust and reliable. Meets all prevailing safety standards. UL recognized, VDE certified and SEV approved. Very good cable handling and protection.

TECHNICAL DATA

Electrical
Rated current: 20 A rms wire size 2.5 mm²
Rated voltage: 250 V ac
Dielectric strength: 4240 V pp
Contact resistance: = 3 m after 5000 insertion-withdrawal operations
Insulation resistance - initial: > 2 G
- after damp heat test: > 500 M
Creepage distance: according to IEC 664-1
Safety ground: Premating

Mechanical
Retention method: Quicklock with securing lever
Cable anchoring: NEUTRIK® chuck principle
Cable O.D. range: 5 - 15 mm
Cable retention force: = 220 N, depending on cable dia and material
Wiring: - Cable: screw-type terminals (use with supplied ferrules for stands) or soldering Nom. wire size/contact: 2.5 mm² / 14 AWG
- Chassis: flat tabs for FASTON 0.187" x 0.02" (4.8mm x 0.5mm) or soldering

Materials
Housing: PA 6 30% GR
Insert (FC part): PBTP 20% GR
Contacts: ZnAI4Cu1 / CuSn8 4 µm / 20 µm Ag plated
Securing lever: ZnAI4Cu1, CuNi plated
Bushing: PA 6 15% GR
Chuck: POM
Temperature range: -30°C to +80°C

CODING
With the two non-interchangeable types of connectors (A-type, B-type) it is impossible to produce a short circuit. Mating connectors (combination) are identified by mechanical keyways and by color:
A-type (POWER INLET) B-type (POWER OUTLET)
Cable connector: blue grey, with blue bushing
Chassis connector: blue grey

NAC3MPA

Chassis connector, air tight, Neutrik D-, G-Series and Speakon NL4MP compatible. Blue. Power IN System.